Tag: metals

Building Metals Inc. Drywall Repair Kit

Building Metals Inc. Drywall Repair Kit

To restore and area of drywall that has been broken you will have sheet rock, a utility knife, quick dry-low dust joint compound, mesh tape for drywall, one inch galvanized drywall screws, a drill, drywall knife and a drywall sanding block. If the tape is undamaged and properly-adhered, the crack was in all probability caused by the old drywall compound drying and shrinking. Let it dry, then apply extra drywall compound, feathering the perimeters as you go. Like we did for the patches we discussed earlier, it can take a number of coats, in addition to a lightweight sanding, between every coat. You solely need the screw to dimple the drywall like you see right here.

As soon as the compound is dry, the contractor will proceed to sand the surface down, so it looks as uniform as possible with the remainder of the wall. Screw the drywall patch to the wooden boards. Sand the floor easy across the hole. The drywall in most homes is ½-inch thick. Where a number of screws are placed in a row, spot-patch each with compound and canopy them with a strip of fiberglass tape as described within the steps above (image three).

Position …